Subaru Outback manuals

Subaru Outback (BR): Vanity mirror light

1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.


1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.

2. Pull the bulb out of the socket.


2. Pull the bulb out of the socket.

3. Install a new bulb.

4. Reinstall the lens.

READ NEXT:

 Door step light

1. Remove the lens by prying the edge of the lens with a flat-head screwdriver. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the lens.

 Cargo area light (Outback) bulb replacing

  1. Remove the lens by prying the edge of the lens with a flat-head screwdriver.   2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Reinstall the lens.

 Other bulbs

Other bulbs may be difficult to replace. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary.

SEE MORE:

 Propeller Shaft

A: REMOVAL CAUTION: Do not disassemble the center EDJ of the propeller shaft. Before removing propeller shaft, wrap the metal parts attached to the rubber boot of center EDJ with a cloth or rubber material, as shown in the figure. The rubber boot may be damaged due to interference with adja

 Components

1) Front sub sensor (right-hand side) 2) Front sub sensor (left-hand side) 3) SRS airbag system warning light 4) Frontal airbag module (driver’s side) 5) Front passenger’s frontal airbag ON and OFF indicator 6) Frontal airbag module (front passenger’s side) 7) Airbag control module (

© 2010-2024 Copyright www.suoutback.com